Hakansson Bandsaw Blades Starrett Bandsaw Blades Dakin Bandsaw Blades Morse Bandsaw Blades

Hakansson 'Silco' Bandsaw Blades

Hakansson 'Silco' Bandsaw Blades

Hakansson 'Silco' bandsaw blades are made from a premium quality carbon steel for faster cutting rates and longer blade life. With a hardened cutting edge and flexible blade back, they are general purpose blades, suitable for cutting mild steel, aluminium, brass, bronze, cast iron, copper etc., as well as wood, plastics, and composites.


Hakansson Silco blades are listed in the following categories:

Carbon Steel Bandsaw Blades

Hakansson Silco Available Sizes & Tooth Pitches

The table below shows the full range of sizes and tooth pitches available for Hakansson Silco.

Please note that small machines, with a blade length of 72"/1830mm or less, normally require thin gauge blades. Thin gauge blade widths and tooth pitches are available in Starrett and Dakin makes.

Width Gauge Thickness Teeth Per Inch
1/4" (6mm) Standard .025" 4, 4AS, 6, 8, 10, 14, 18 Add
3/8" (10mm) Standard .025" 3, 3AS, 4, 6, 8, 10, 14 Add
1/2" (12mm) Standard .025" 3, 3AS, 4, 6, 8, 10, 14, 18 Add
5/8" (16mm) Standard .032" 3, 4, 10 Add
3/4" (19mm) Standard .032" 3, 3AS, 4, 6, 10, 14 Add
1" (25mm) Standard .035" 2, 3, 4, 6, 10 Add
1.1/4" (31mm) Standard .042" 3 Add

Click on 'Add' to select a custom-length blade with that row's width and thickness.